Changzhou Hongle Machinery Co.,Ltd
Changzhou Hongle Machinery Co.,Ltd
Add to Cart
Front & rear opening checker plate tailgates with tie rails
Mudguards checker plate with deflection rails
Swing handles to secure the tailgates
V- type draw bar made from square RHS tube
Spare wheel holder on draw bar
Lockable plunger coupling
LED ADR approved lights (Protected) front and sides reflectors
Mudflaps
New wheels
Plug holder welded to the draw bar
Tube holder in each corner for fitting cage
SPECIFICATIONS
| BODY/FLOOR | 350MM Sides, 2 piece, 2.4mm Rolled Checker Plate Tub |
| TAILGATES | 2.4mm Checker Plate, with tie rails |
| MUDGARDS | 2.4mm Checker Plate, 250mm Wide 4 Folds |
| DEFLECTION RAILS | 50x50 Angle on each side |
| SIDE TIE RAILS | 32x2mm Pipe Round Full Length (with extra reinforced plates) |
| COUPLING | 50mm Lockable Plunger |
| CHASSIS | 50x50x2.5mm SHS |
| DRAW BAR | 70x50x3mm RHS V-type, with spare wheel holder |
| SAFETY CHAIN | 8mm Rated chain 450mm Long |
| SUSPENSION | 6-Leaf Floating Shackles Springs |
| AXLES | Solid Axle 39mm Round |
| HUBS/FORD | LM A-type PCD 114.3, 5 x 1/2" Studs (Stud Centre 66.6mm) |
| BEARINGS | Bearing A-type Inner Large LM67048 Outer Small LM11949 |
| RIMS | NEW Sunraysia Type 14x5.5" CB 84mm PCD 114.3 |
| TYRES | NEW 185R14C |
| LIGHTS | LED Multi volt 12-24v, Side Clearance Lights 5ft only 7-Pin plug |
| TRAILER DIMENSIONS | |||
| 6x4 | 7x4 | 7x5 | |
| SIDE HEIGHT | 350 | 350 | 350 |
| FLOOR HEIGHT | 530 | 530 | 530 |
| OVERAL HEIGHT | 880 | 880 | 880 |
| INSIDE LENGTH | 1820 | 2130 | 2130 |
| INSIDE WIDTH | 1220 | 1220 | 1520 |
| DRAWBAR LENGTH | 1250 | 1250 | 1320 |
| OVERAL LENGTH | 3120 | 3430 | 3500 |
| OVERAL WIDTH | 1730 | 1730 | 2030 |
| LOAD RATING KG | 750 | 750 | 750 |
| ATM KG | 250 | 267 | 293 |
| PAYLOAD KG | 500 | 483 | 457 |