Changzhou Hongle Machinery Co.,Ltd
Changzhou Hongle Machinery Co.,Ltd
Add to Cart
SPECIFICATIONS
| BODY/FLOOR | 350MM Sides, 2 piece, 2.4mm Rolled Checker Plate Tub |
| TAILGATES | 2.4mm Checker Plate, with tie rails |
| MUDGARDS | 2.4mm Checker Plate, 250mm Wide 4 Folds |
| DEFLECTION RAILS | 50x50 Angle on each side |
| SIDE TIE RAILS | 32x2mm Pipe Round Full Length (with extra reinforced plates) |
| COUPLING | 50mm Lockable Plunger |
| CHASSIS | 50x50x2.5mm SHS |
| DRAW BAR | 70x50x3mm RHS V-type, with spare wheel holder |
| SAFETY CHAIN | 8mm Rated chain 450mm Long |
| SUSPENSION | 6-Leaf Floating Shackles Springs |
| AXLES | Solid Axle 39mm Round |
| HUBS/FORD | LM A-type PCD 114.3, 5 x 1/2" Studs (Stud Centre 66.6mm) |
| BEARINGS | Bearing A-type Inner Large LM67048 Outer Small LM11949 |
| RIMS | NEW Sunraysia Type 14x5.5" CB 84mm PCD 114.3 |
| TYRES | NEW 185R14C |
| LIGHTS | LED Multi volt 12-24v, Side Clearance Lights 5ft only 7-Pin plug |
| TRAILER DIMENSIONS | |||
| 6x4 | 7x4 | 7x5 | |
| SIDE HEIGHT | 350 | 350 | 350 |
| FLOOR HEIGHT | 530 | 530 | 530 |
| OVERAL HEIGHT | 880 | 880 | 880 |
| INSIDE LENGTH | 1820 | 2130 | 2130 |
| INSIDE WIDTH | 1220 | 1220 | 1520 |
| DRAWBAR LENGTH | 1250 | 1250 | 1320 |
| OVERAL LENGTH | 3120 | 3430 | 3500 |
| OVERAL WIDTH | 1730 | 1730 | 2030 |
| LOAD RATING KG | 750 | 750 | 750 |
| ATM KG | 250 | 267 | 293 |
| PAYLOAD KG | 500 | 483 | 457 |